This HAT offers LTE-A global multi-band capabilities, integrating the EM060K-GL Module for high-speed network access of up to 300Mbps downlink and 50Mbps uplink rates. Whether you’re enhancing your Raspberry Pi, Jetson Nano, or PC, this HAT empowers your devices with lightning-fast LTE-A communication, advanced global positioning, and unprecedented data transfer speeds.

Featuring a USB 3.1 port (backwards compatible with USB 2.0), the communication HAT offers versatile connectivity options. Seamlessly integrate the HAT with your chosen device, and instantly unlock the potential of high-speed LTE-A networks. One of the standout features of this HAT is its integrated multi-constellation high-precision GNSS positioning. With support for GPS, GLONASS, BDS (BeiDou), and Galileo satellite systems, your device has exceptional accuracy in global positioning.

Its integration of LTE-A capabilities through the EM060K-GL module, USB 3.1 port, and multi-constellation high-precision GNSS positioning, makes it an invaluable asset for a range of applications. From IoT projects that demand reliable and fast communication to location-based services requiring accurate positioning, this HAT opens up a world of possibilities.

Note: Raspberry Pi is NOT included

Features

• Integrated multi-constellation high-precision GNSS positioning: GPS, GLONASS, BDS, Galileo
• Integrates rich network protocols, with multi drivers and software support, compatible with different systems including Windows / Linux / Android
• USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano to enable high-speed LTE-A network
• Standard M.2 B KEY slot, compatible with QUECTEL and SIMCOM series 4G/5G M.2 modules
• Onboard PWR and RST control pins, enabled via DIP switch, for connecting external IO ports to control module power on/off and reset
• Onboard USB-C connector, enabled via a switch, for connecting standalone power supply for the module, stable and flexible, supports more loads
• Onboard power supply switch, reset button and LED indicator, easy to turn on/off the module and monitor the operating status
• Reserved 4x SMA to IPEX antenna connectors, easy to install and change the SMA antenna positions
• High-efficiency power supply circuit, up to 3A output current

Connection Example – Raspberry Pi 4B and 3B+

Specifications

Resources

• Product Wiki

Pinout

1. Raspberry Pi GPIO header
   for connecting with Raspberry Pi
2. DIP switches
   Enables the power control and reset pins
3. M.2 slot
   Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor
4. SIM card slot 1
   one of the 2x SIM card slots, dual card single standby
5. USB3.1 port
   USB 2.0 is compatible, with connecting to different hosts
6. USB Type-C port
   5V 3A input, stable and flexible power supply
7. Audio jack
   SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function
8. Antenna connector
   Supports quad antennas
9. Reset button
10. Power supply switch
    Switch the power supply mode:
    When set to USB, the module is powered via the “5. USB3.1 port”
    When set to EXT PWR, the module is powered by the external power supply via the “6. USB Type-C port”
11. Indicator
    Easy to monitor the operating status of the module

Back of the Board

1. Cooling fan
   Better heat dissipation for both Raspberry Pi and the 5G module
2. SIM card slot 2
   Switchable via AT command
3. Module settings switch
   Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules;
   Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules;
   Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
4. USB 2.0 interface pads
5. NAU8810X Audio Chip
   For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function
6. Fan Header
   5V cooling fan power supply

Package Contents

1. 1x M.2 TO 4G/5G HAT
2. 1x EM060K-GL
3. 2x Antenna
4. 2x IPEX adapter cable
5. 1x 2x20PIN pin header
6. 1x GNSS antenna
7. 1x Dual plug USB3.0 cable
8. 1x USB3.0 adapter
9. 1x USB2.0 adapter
10. 2x SMA protective cap
11. 1x Screws pack