Introduction

6WD mobile platform can be installed on various types of control boards or controllers, such as raspberry pie. On the chassis with a 3mm mounting hole, horizontal 12mm, vertical 14mm hole spacing can be very different aspects of the installation of a variety of sensors, or additional expansion of other functions, such as the installation of a robot. The upper floor reserved for platform, raspberry platform installation hole.

Feature

• Damping soft and hard adjustable, through the extension spring.
• The road surface is uneven, shock absorption access will be adaptive to the road.
• 12 flange bearings are used in the link to reduce frictional resistance.
• Powerful expansion capabilities, you can arbitrarily modified.

Parameters

Vehicle size: 28 * 21 * 11.5cm

Vehicle quality: 1.4kg

Maximum load: 6kg

Operating voltage: 12V

Rated current: 350mA * 6

Engine original speed: 17000rpm

Output shaft speed: 500rpm

Rated torque: 5kg/cm

Shipping list

• Upper Plate * 1
• Lower Plate * 1
• Motor Fixing Plate * 6
• U-shaped Fixing Plate * 3
• U-shaped Shock Absorber Fixing Seat * 3
• Shock Absorber * 6
• Motor * 6 (GA25-370)
• Rubber Tire * 6 (72mm)
• Copper Column * 6 (17-4mm)
• Countersunk Head Screw * 8 (M3*30mm)
• Nylon Standoff * 12 (MR8327, 1/4 3/8)
• Round Head Screw * 8 (M2.5*14mm)
• Round Head Screw * 8 (M2.5*16mm)
• Hex Socket Head Cap Screw * 13 (M3*5mm)
• Round Head Screw * 55 (M3*10mm)
• Hex Nut * 15 (M2.5)
• Hex Nut * 26 (M3)
• Silicone Wire * 1500cm (20AWG)
• Micro Switch
• Phillips Screwdriver * 1