Raspberry Pi POE HAT

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ andRaspberry Pi 4 Model B (launched March 2018). The PoE HAT allows you to power your Raspberry Pi using Power over Ethernetenabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.

Supplied with this product Raspberry Pi PoE HATMechanical spacers Other hardware needed A RASPBERRY PI 3 Model B+ An Ethernet cable power-sourcing equipment for an 802.3af Power over Ethernet network Connecting your PoE HAT to the Raspberry Pi Before installing the PoE HAT, you must attach the supplied spacers in the four corners of the board then connect the Raspberry Pi PoE HAT to the two 0.1 headers (40 + 4) that are fitted on the Raspberry Pi once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector.

Additional information No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pis software is up to date for all functionality to be available.

For this product to be used, the network it is connected to needs to have power-sourcing equipment installed. Before installing the PoE Hat, you must attach the supplied spacers in the four corners of the board Then connect the Raspberry Pi PoE HAT to the two 0.1 headers (40 + 4) that are fitted on the Raspberry Pi Once the PoE HAT board is connected, you can power the Raspberry Pi through its RJ45 network connector Kit Contain Raspberry Pi PoE Hat & Mechanical spacers.

Note:Robocraze is the authorized sellers of Raspberry Pi products in India. Therefore even if you are in Bangalore, Hyderabad, Kerala, Mumbai or Pune, you can buy Raspberry Pi POEonline from Robocraze at the comfort of your homes.

Links you may find useful

• Board modification product change note 001

• Board modification product change note 002