TheHeyGears UltraCraft Reflex Turbo is a professional desktop MSLA resin 3D printer designed for high-detail prototypes, presentation models, functional parts, transparent components, tooling, miniatures, and small-batch production.

Combining a 9.25-inch Amber Screen, a 385+ nm TrueUV light source, a 33 m native XY pixel size, and a 191 121 220 mm build volume, the Reflex Turbo delivers precise and repeatable results while reducing the manual setup normally required by resin 3D printing.

Its integrated workflow includes automatic leveling, resin heating, resin level detection, automatic refilling, peeling-force monitoring, residue detection, adaptive exposure strategies, and long-term light-intensity compensation.

Key Features

Upgraded 9.25-Inch Amber Screen

The upgraded Amber Screen provides improved contrast for cleaner edges, small holes, thin walls, and fine surface details.

According to HeyGears laboratory data, the Amber Screen offers:

• Approximately 22% higher contrast

• Up to 2.5 times longer service life than the previous screen

• Improved UV resistance and long-term print consistency

385+ nm TrueUV Light Source

The proprietary 385+ nm UV light source is optimized for HeyGears UltraPrint materials and provides more effective curing than conventional 405 nm systems.

It supports a broad range of material properties, including:

• High-detail modeling

• Transparent components

• Flexible and elastic parts

• Heat-resistant prototypes

• Rigid engineering parts

• Castable patterns

Material compatibility and required accessories vary by resin.

33 m Native XY Pixel and 16 m Stated Accuracy

The Reflex Turbo combines a native XY pixel size of 33 m with manufacturer-stated printing accuracy of 16 m, making it suitable for detailed surfaces, precise assemblies, small features, and dimension-sensitive prototypes.

In HeyGears laboratory testing:

• Features as small as 0.136 mm were printed using PAP10 resin

• 90.6% of measured printed surfaces achieved a tolerance of 0.05 mm or less

Results depend on the model, resin, orientation, support strategy, post-processing, and measurement method.

Automated Resin Printing Workflow

Floating-Screen Automatic Leveling

The floating-screen system automatically compensates for platform and screen alignment differences, eliminating the need for traditional manual paper leveling.

It can compensate for gaps of up to 240 m, helping maintain consistent first-layer adhesion across the build area.

Automatic Resin Level Detection and Refill

The integrated resin-management system detects the remaining resin quantity with an accuracy of approximately 5 g.

Compatible resin bottles can automatically supply additional material:

• Before printing

• During long print jobs

• When the resin level becomes low

This reduces manual supervision and makes the printer more suitable for large models and continuous production.

Automatic Resin Heating

The heated resin tray can raise resin temperature from approximately 10C to 22C in around 20 minutes and maintain the target temperature during printing.

Controlled resin temperature helps stabilize:

• Resin viscosity

• Material flow

• Layer separation

• Exposure performance

• Dimensional consistency

This is particularly useful in colder workspaces and when printing higher-viscosity engineering materials.

High-Sensitivity Residue Detection

Integrated force sensors monitor the printing process with a sensitivity of approximately 0.1 N.

The system can detect resin residue as small as approximately 0.2 mm and automatically stop when residue or an abnormal printing condition is detected.

This helps reduce the risk of cured debris being pressed into the release film or LCD screen.

Smart Peeling-Force Management

The Reflex Turbo monitors layer-separation forces throughout the print.

The printer adjusts movement behavior according to the model geometry and current layer, helping reduce failures caused by:

• Large cross-sections

• Sudden changes in layer area

• Dense model layouts

• Complex support structures

• High-viscosity materials

Intelligent Printing Strategies

Intelligent Regional Exposure

Instead of applying one exposure strategy to the entire layer, the Reflex Turbo can identify and process different regions independently, including:

• Support structures

• External shells

• Internal shells

• Fine surface features

This helps balance support strength, surface hardness, detail restoration, and dimensional accuracy.

Advanced Z-Axis Compensation

Material-specific process packages can apply adaptive Z-axis compensation based on factors such as:

• Model angle

• Hole size

• Edge type

• Material properties

• Support contact surfaces

HeyGears states that the system supports up to 180 combinations of compensation settings.

Dynamic Motion Algorithm 3.0

Dynamic Motion Algorithm 3.0 evaluates each layer using factors such as:

• Cross-sectional area

• Number of parts

• Part spacing

• Layer complexity

• Expected peeling load

The printer then selects an appropriate strategy from 18 adapted motion-control parameter sets, improving the balance between speed, stability, and print success.

Consistent Results Across the Build Plate

Each LCD screen is factory calibrated to keep light-intensity variation across the printing area within approximately 3%, according to HeyGears laboratory data.

The printer also records light-source aging information and applies automatic light-intensity compensation, helping maintain consistent exposure throughout the service life of the printer.

Blueprint Studio Software

The Reflex Turbo works with HeyGears Blueprint Studio, which connects model preparation, slicing, printing, and compatible post-processing devices in one workflow.

Blueprint Studio provides tools for:

• Model inspection and repair

• Orientation and automatic layout

• Hollowing and drainage-hole creation

• Automatic and manual support generation

• Material and process-profile selection

• Slicing

• Printer management

• Remote task assignment

• Print-status monitoring

• Firmware and process-profile updates

Print files can be transferred through USB, Wi-Fi, or Ethernet. Network access is required for cloud-based remote management and scheduling features.

The Blueprint Go mobile application can also be used to view compatible device and print-status information.

Material Compatibility

The Reflex Turbo is designed primarily for HeyGears UltraPrint resins with supported Blueprint Studio process packages.

Available material categories include:

• Standard modeling resin

• Precise-detail resin

• Water-washable resin

• Transparent resin

• Flexible resin

• Heat-resistant resin

• PC-like engineering resin

• Elastic tooling resin

• Castable resin

Some materials can be printed with the standard resin tank, while others require the optional Pulsing Release Module.

Always select the material profile currently shown in Blueprint Studio, as supported materials and process packages are updated over time.

Third-Party Resin Notice

HeyGears currently promotes Open Material Mode for the Reflex RS and Reflex RS Turbo. Third-party resin parameter editing should therefore not be assumed to be available for the Reflex Turbo.

Verify current Blueprint Studio support before purchasing the printer for third-party resin use.

Optional Pulsing Release Module

For compatible high-performance materials and difficult model geometries, the Reflex Turbo can be used with the first-generation HeyGears Pulsing Release Module.

The module generates alternating positive and negative pressure within the pulsing release film to reduce layer-separation force. Depending on the material and model, this can enable:

• Fewer supports

• Smaller support contact areas

• Easier support removal

• Reduced surface-finishing work

• Improved printing of complex structures

The Reflex Turbo requires the Reflex/Reflex Turbo Pulsing Release Resin Tank.

PRM tanks made for the Reflex RS/RS Turbo or Reflex 2/Reflex 2 Pro are different and should not be treated as interchangeable.

Recommended Applications

The Reflex Turbo is suitable for:

• Product-design prototypes

• Engineering validation models

• Dimension-sensitive assemblies

• Transparent display components

• High-detail miniatures and figures

• Architectural and presentation models

• Flexible and elastic prototypes

• Jigs, fixtures, and tooling

• Castable patterns

• Small-batch resin production

Technical Specifications

Package Contents

The package overview includes:

• HeyGears UltraCraft Reflex Turbo printer

• Standard resin tank

• Build platform

• Resin-tank level and temperature sensor

• Power cord

• LCD screen sealing tape

• Spare release film

• Spare release-film screws

• Part-removal tool

• Plastic scrapers

• Pliers

• Allen wrenches

• Protective gloves

• Simple cleaning container

• Filter papers

• Residue-removal tool

• Multifunctional handle

Package contents may vary by production batch or sales region. Refer to the final packing list supplied with the product.

Important Purchase Information

• Resin is not included unless explicitly stated.

• UltraCraft Wash and UltraCraft Cure are sold separately.

• The Pulsing Release Module and pulsing resin tank are sold separately.

• Certain engineering and castable resins require the Pulsing Release Module.

• Resin prints still require cleaning, support removal, and UV post-curing.

• Wear suitable protective gloves and follow the resin SDS and local disposal regulations.

• Printing results depend on the selected resin, process profile, model orientation, supports, ambient conditions, and post-processing workflow.