Before operating the equipment, the user must carefully read the operation manual and strictly abide by it. This manual is applicable to multiple models of products.

This equipment uses international standard four types of lasers (strong laser radiation). Laser radiation may cause the following events: Olgnite surrounding combustibles; During the laser pro-cessing, due to different processed objects, other radiation and other toxics may be generated Harmful gas; 3)Direct laser radiation may cause personal injury. Therefore, the equipment must be equipped with firefighting equipment. It is strictly forbidden to stack flammable and explosive materials on the workbench and around the equipment. At the same time, ensure good ventilation. Non-professional operators are not allowed to approach the equipment.

• Laser processing objects and emissions should comply with local laws and regulations.
• Laser processing may have high risks, so you should carefully consider whether the object is suitable for laser processing.
• The internal laser equipment has high voltage and other dangers, except for equipment operators, it is strictly prohibited to disassemble.
• When the equipment is turned on, someone must be guarded, unauthorized leaving is forbidden, and all power must be cut off before personnel leave.
• It is forbidden to open any door when the equipment is working.
• Before starting operation, this equipment and other equipment must be safely and effectively grounded.
• Do not place any irrelevant total reflection or diffuse reflection objects in the equipment to prevent the laser from being reflected on the human body or flammable objects.
• During the operation of the equipment, the operator must always observe the operation of the equipment. If an abnormal situation occurs, please immediately cut off all power supplies and actively take corresponding measures.
• The equipment should be in a dry, pollution-free, vibration-free, and strong electromagnetic interference environment, with a working temperature of 5-40 degrees Celsius and a humidity of 5-95% (non-condensing water environment).
• The equipment should always be far away from electrical equipment sensitive to electromagnetic interference, otherwise it may cause electromagnetic interference.
• The working voltages of the equipment are: AC220V and AC110V (please confirm the working voltage of the equipment before use)
• The most important carbon dioxide glass laser in the equipment is a consumable and a vulnerable item. Please take care of it during use.
  The carbon dioxide glass laser needs pure cold water to cool down.
  Please pay attention to the water temperature not to exceed 30 degrees Celsius during use, otherwise the laser will be damaged. When the ambient temperature is about to drop below 0 degrees Celsius, please replace it with an antifreeze liquid to avoid damage to the carbon dioxide glass laser.
• It is forbidden to turn on the equipment when the grid voltage is unstable or mismatched. The manufacturer and seller are not responsible for any loss caused by incorrect use or non-compliance with the above regulations.

3020 CO2 laser engraving machine typically has a working area of 300 x 200mm (12 x 8 inches). The weight of the machine can range from 35kg to 47.4lbs (21.5kg).

Here’s a more detailed breakdown:

• Working Area: 300 x 200mm (12 x 8 inches). This is the area where the laser can engrave or cut materials.
• Machine Size: A common size is 800 x 530 x 250mm according to Voiern. However, some models may be slightly larger. For example, one model is listed as 920mm x 500mm x 260mm.
• Weight: Typically around 35kg (77 lbs) or 47.4lbs (21.5kg).
• Laser Power: Commonly 40W or 50W.
• Cooling: Often water-cooled to prevent overheating.
• Connectivity: Typically connects via USB to a computer.
• Software: Commonly supports CorelDraw and other compatible formats like EMF, JPG, PLT, and WMF.