APPLICATION:
Our 16/12 Pair (24-Conductor) Tray Cable Exposed Run Instrumentation Cables (TC-ER) are suitable for control, instrumentation and process control circuits, where protection against electrostatic interference from both outside of the cable and from pair to pair is needed. TC-ER Shielded Pairs with Overall Shield (SPOS) cables are suitable for wet or dry applications, direct burial, indoor or outdoor locations, installed in cable trays, ducts, aerially or conduits and for applications up to 600 volt and temperatures up to 90C. TC-ER SPOS Instrumentation Cables are suitable for use in Class 1 Division 2 Hazardous locations per NEC.

CONDUCTORS:
Stranded soft drawn bare copper conductor, per ASTM B3 & B-8

INSULATION:
Polyvinyl Chloride (PVC) insulation with a nylon overcoat

JACKET:
Polyvinyl Chloride (PVC) jacket, which is water, chemical, sunlight and abrasion resistant

COLOR CODE:
Black & White numbered pairs

SHIELD:
Aluminum polyester foil with 100% coverage on each pair, with an overall aluminum polyester foil with 100% coverage with a tinned copper drain wire in contact with all shields

All values are nominal and subject to correction