• Model No. LU24R-18
• Joist Size 2×4 rough
• Gauge. 18
• Width (in.) 2
• Height (in.) 3-11/16
• Coating/Material. Zinc Galvanized, G90

The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value engineered for strength.

Key Features

• LU-series hangers are tested, load rated and code compliant
• The LU series installs using several fastener selections with tested allowable loads

Load Tables / Values

• Face-Mount Hangers – Solid Sawn Lumber (DF / SP) Tables
• Face-Mount Hangers – Solid Sawn Lumber (SPF / HF) Tables
• Face-Mount Hangers – Rough Lumber (DF / SP / SPF / HF) Tables

Installation

• Install with 0.162 in. x 3-1/2 in. nails in the header and 0.148 in. x 1-1/2 in. nails in the joist; #9 x 1-1/2 in. Strong-Drive SD screws may also be used
• Joists sloped up to 1/4:12 achieve table loads
• When nailing into solid sawn carrying member’s end grain, the allowable load is adjusted by a factor of 0.67

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.