• Model No. LTS18-REV (Reverse Bend)
• Thickness (mil) 43
• Gauge. 18
• Length (in.) 18
• Coating/Material. Zinc Galvanized, G90

The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members.

Key Features

• Available with the bend reversed
• Versatile with many lengths offered to fit the specific application
• Straps do not need to be wrapped over the truss to achieve the allowable load

Installation

• Install with 10d common nails or 10d x 1-1/2 in. nails
• Use all specified fasteners, with half into each member being connected, to achieve the listed loads; see Specifications.
• Available with the bend reversed. Specify “-REV” after the model number, such as LTSXX-REV.

This is a Special Order item, or Made to Order by Simpson Strong-Tie, it is non-refundable. Please verify that all configurations / specifications are correct before checking out.

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.