Automatic Candy Demolder

Fully Electric!Plug & Play Anywhere No Compressed Air Required

The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one pop. Unmold your trays in second! Ideal for Hard Candy, Gummies, Caramels, Chocolate, Caramel, Taffy and more! The automatic mold Popper includes one standard mold frame to match the Truffly Made mold you are using. Please note that molds are not included.

Custom mold plates are available for additional 1,699 USD to work with your silicone molds*

Unmolding Rate: 15,000+ pieces per hour

Adjustable Speed

Dimensions: 27.16 W x 38.58 L x 27.56 H

*The Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.

Maximum cavities per mold = 80

Maximum Mold size = 11.5 x 15

Please contact [email protected] for a custom quote

LARGE PIN FITTINGS AVAILABLE HERE

Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility.

The Truffly Made Automatic Demolder.

Easy to use, just one press to pop out a full mold sheet of candies within seconds!. Works best if the candies are cooled off and hardened.

• Select the mold frame that matches the mold you are using.
• Place the mold frame in to the Demolder.
• Add your filled mold on top of frame.
• Slide the frame in the Demolder
• Press the pedal.
• DONE! All your candies are unmolded.

PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS.

WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY.

SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY.

Specifications:

• Height: 700mm / 27.56
• Width: 690mm / 27.16
• Length: 980mm / 38.58
• Weight: approx. 32 kg / 70 lbs with pusher and frame
• Material: Stainless Steel / Aluminum
• Power input: 100-240V AC / 50-60Hz
• Power Output: 24V DC / max.320W
• Electric motor: 7 amps, force: 10Nm, speed infinitely adjustable up to 70rpm; Change of direction of rotation
• Treble-bass adjustment; Penetration depth setting: 15mm
• Foot or Hand Pedal Activated
• Made in Germany