BIQU Panda Stack Aluminum Rack for Bambu A1

The BIQU Panda Stack is a dual-layer storage rack designed around Bambu Lab A1 and A1 mini printer setups. Its purpose is simple: place the printer on the top layer while organizing AMS, ViViD, ACE, or related filament units on the lower layer so the whole setup uses less desk space.

BIGTREETECH documentation lists the main body material as 6061 aluminum alloy with an iron top panel. The rack also supports printable accessory mounts, so users can add useful items such as a waste bin, tool holder, or USB slot without redesigning the whole station.

It fits naturally beside other Panda-Verse workflow upgrades such as BIQU PANDA-VERSE Storage, BIQU PANDA-VERSE RGB, and BIQU Panda Cushion XP when building a more organized A1 or A1 mini printing area.

Technical Specifications

Board Layout & Label Guide

• Top platform supports the A1 or A1 mini printer above the storage layer.
• Lower bay is arranged for AMS, ViViD, ACE, or similar material handling units.
• 6061 aluminum side panels form the load-bearing frame.
• Iron top panel provides a stable printer support surface.
• Pull-out tray area improves access to the lower material unit.
• Handle and pull ring identify the moving parts used during setup changes.
• Bottom foot pads stabilize the rack on the work surface.
• Accessory mount points allow printed organizers or holders to be added later.

Packing List

• 1 x BIQU Panda Stack rack kit
• 1 x Tray handle set
• 1 x Pull-out ring set
• 1 x Screw and fastener pack
• 1 x Foot pad set
• 1 x Product packaging

FAQ

Q: What printer goes on the top layer?

A: The official documentation lists Bambu Lab A1 and A1 mini printers for the top layer.

Q: What can be placed on the lower layer?

A: The lower layer is intended for AMS, ViViD, ACE, or related material units listed in the official Panda Stack documentation.

Q: What material is the rack made from?

A: BIGTREETECH lists 6061 aluminum alloy for the body and iron for the top panel.

Q: Does it include RGB lighting?

A: The rack supports optional RGB lighting, but the strip, controller, and power supply can be separate items depending on the selected bundle.

Q: Is it preassembled?

A: No. It is a kit-style rack and should be assembled using the included panels, rails, handle parts, feet, and screws.

Q: Can I add tool holders?

A: Yes. The documentation notes printable accessory mounts for items such as a waste bin, tool holder, or USB slot.

Q: Is it for X1 or P1 printers?

A: This Panda Stack listing is built around A1 and A1 mini top-layer use. Choose a different storage product for X1 or P1 setups.

Q: What should I check before use?

A: After assembly, confirm the frame is square, screws are tight, the tray slides smoothly, and the printer sits flat before starting a print.