Features:

• Widely used
• Stepper motor controller + integrated driver
• TTL serial communication
• Automatic/manual multiple modes
• LCD display

Product introduction:
This is an operation control module specifically for single-axis stepper motors. The module has a variety of fixed operating modes built-in, and the user can quickly select the appropriate motion track. You can save and set the distance/speed/delay/cycle times after power-off. It can run independently as a module, or it can be used with other systems. It can be used in general industrial control occasions, but cannot be used in special industries such as medical treatment and fire fighting or life-critical fields.

Parameters:

• Model: ZK-SMC02 stepping motor controller + driver
• Adapted motor: stepper motor
• Number of control axes: single axis
• Motor signal: common cathode
• Power supply range: DC 5-30V universal
• Drive capacity: 4A
• Instruction features: streamline and optimize multiple commonly used instructions
• Acceleration and deceleration control: Yes
• Input reverse connection protection: Yes
• Remote communication control: TTL serial port
• Main functions of the system: automatic, manual, setting, serial port control
• Speed range: 0.1~999 laps/minute
• Number of forward pulses: 1-9999 pulses
• Number of reverse pulses: 1-9999 pulses
• Cycle work times: 1-9999 times
• Forward delay time: 0.0-999.9 seconds
• Reversal delay time: 0.0-999.9 seconds
• Subdivision selection range: 1-128 subdivision
• Product use environment: -5C-60C (non-condensing)

Other instructions:

1. As long as it is a 2-phase 4-wire 5-wire 6-wire 8-wire stepper motor, it can be controlled.
   
2. It can control drivers with similar interfaces.
   
3. The number of pulses for one revolution should be determined according to the subdivision of the driver and the step angle of the stepper motor