MAMBA F722S APP I2C WIFI F50PRO 3-6S Flight Controller Stack

FIRMWARE TARGET /CONFIGMAMBA F722 I2C

About WIFI APP

Diagram Link From Help Centre Link

NoteSince STM32F722 heat large please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

Update Details:
BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverterDual-WayTX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position

FC Specifications
MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Barometer: No
OSD: BF OSD
Blacbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
LED Controller:BF LED/MB LED 4 Set 2812 LED
WIFI: SpeedyBee APP
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
TVS Protection: Yes
BEC: 5V 2.5A & 9V 2A (Max 3A)
MOUNTING: 30.5mm/M3 WEIGHT: 9g
Supply :
8pin sh1.0 *1

Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes

ESCSpecifications

F50PRO

INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)

CONTINUE CURRENT: 50A4

BURST CURRENT: 60A (10S)

BEC: NO

ESCDshot300/600/1200

MOUNTING: 30.5mm/M3

Supply : Panasonic High Frequency 470uF/35V

Mounting: 30.530.5mm,3
Dimensions:
Weight: 22g
Including
1MAMBA F722 APP F50PRO

About SpeedyBee Function

ForWIFI

ForBlueTooth