heR7FA4PLUS B development board is based on the same RA4M1 32-bit microprocessor as the Arduino UNO R4 WiFi and uses a similar board style and layout.

The RA4M1provides increased processing power, expanded memory, and additional peripherals. It isbased on the Arm Cortex-M4 processor, with a main operating frequency of 48MHz. The board also features 256 kB of Flash and 32 kB of RAM.

Also onboard is an ESP32-S3 module, providing dual-mode 2.4GHz Wi-Fi and Bluetooth LE capabilities. This provides wireless communication and compatibility with Arduino IoT Cloud for remote monitoring and control.

For display and interactive projects, the board includes an onboard 12 x 8 red LED matrix, which is ideal for animations or displaying sensor data without the need for additional hardware. Additional features include a 12-bit DAC, CAN bus and operational amplifiers.

5V/3.3V headers make the integration of various expansion modules a lot easier. It also supports multiple power sources, including a USB-C connection or an external power supply ranging from 6V to 24V. For development purposes, the board comes with several LEDs including a power indicator, a user LED, and serial communication indicators (RX/TX).

Lastly, the inclusion of an ICSP interface, usable as an SPI interface, makes this board a flexible choice for developing advanced projects with enhanced connectivity and functionality. A USB-C cable is included.

We also stock the PLUS A version!

Features

• Based on R7FA4M1AB3CFM – compatible with Arduino UNO R4 Minima
• Utilises Renesas Electronics’ RA4M1 (Arm Cortex-M4) microcontroller
• ESP32-S3 module, integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication
  • Combined with Arduino IoT Cloud, you can remotely monitor and control your project
• 12×8 Red LED matrix
• 256 kB Flash and 32 kB RAM
• 12-bit DAC
• CAN bus
• Operational amplifiers
• 5V/3.3V headers for easy voltage switching
• Flexible power options, supporting USB-C power supply or external input power VIN (6V<=VIN<=21V).
• Onboard power indicator LED (PWR), USER LED, serial port receive indicator LED (RX) and transmit indicator LED (TX)
• ICSP interface

What’s on Board

1. R7FA4M1AB3CFM
2. ESP32-S3-MINI-1 module
3. MP8759
   5V voltage regulator
4. TXB0108DQSR
   Voltage translator, for communication between R7FA4 and ESP32-S3
5. AMS1117-3.3
   3.3V voltage regulator
6. DC input
   6V ~ 24V
7. Qwiic connector
   For connecting I2C device of Qwiic Eco
8. USB Type-C connector
   For uploading program OR serial port debugging
9. Power output header
   3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output and common-grounding with other boards
10. ESP32-S3 pin-header
    for ESP32-S3-MINI-1 firmware downloading
11. USB communication selection
12. ICSP interface
13. Power Configuration
    For configuring R7FA4 PLUS B operating voltage
14. Reset button
15. Arduino interface
    compatible with standard Arduino interface, adapting 2.54 pitch solder pad, can be directly connected to the experimental board
16. User LED
17. Serial port RX/TX indicators
18. Power indicator
19. 12 x 8 LED matrix

Specifications

Resources

• Product Wiki
• Schematic

Pinout

Package Contents

• 1x R7FA4 PLUS B
• 1x USB Type-A to Type-C cable