The RunCam Link Wasp is a digital FPV system that is DJI FPV Remote Controller compatible. Users can connect their DJI FPV Remote Controller without having to purchase additional receivers. This reduces costs and is easy to set up for every pilot. The HD transmission system of the FPV Air Unit can allow up to eight drones to fly simultaneously. Each operator has an exclusive channel to reduce cross-interference to provide an optimal immersive experience. The RunCam Wasp has an extended 155 FOV that supports 120fps, with a 28ms low latency and a 4:3 ratio.

Features

• 8 Channels for Drones : The HDL FPV Transmission system and the FPV Air Unit are equipped with eight frequency channels, which allow up to eight drones to fly simultaneously. Each operator has an exclusive channel. This helps to reduce cross-interference and provide an optimal racing experience.
• Embedded DJI Remote Controller Receiver : Users can wirelessly connect their DJI FPV Air Unit to the DJI FPV Remote Controller without having to purchase additional receivers. This reduces flight preparation time significantly.
• Runcam WASP HD Camera : 120fps 4:3, 155 degree low latency camera
• 120fps, 50mBit low latency : with as low as 28ms latency

User Manual

• RunCam-link-phoenixHD-Kit-manual

Specifications

RUNCAM LINK

• Dimensions: L29mm*W29mm*H13 mm
• Max. Distance: FCC/SRRC:0.7 km
• Frequency: 5.725-5.850 GHz
• Power: 7.4-26.4 V@ 4-9W
• Net Weight: 19.5 g

RUNCAM WASP

• Dimensions L19mm*W19mm*H19mm
• LENS FOV D:155 H:125 V:96
• Resolution 720P@120fps(4:3)
• Net Weight 7.5g(With Cable)
• Shutter Rolling Shutter
• Coaxial Cable 120 mm
• Image Sensor 1/3″

Included

• 1x RunCam Link Digital HD FPV VTX
• 1x RunCam Wasp Camera
• 1x JST SH 1.0 6-Pin Cable
• 1x Link IPEX Antenna
• 1x Manual