The Shelly Dimmer 0/1-10V PM Gen3 is a smart dimming controller with power measurement built-in, which allows remote control of0-10V and 1-10V driversthrough most popular home automation platforms and protocols, including Home Assistant, Alexa, Google Home, the Shelly Smart Control app or your preferred automation platform.

It can work standalone in a local Wi-Fi network or it can also be operated through cloud home automation services. The device is a current sourcing controller and provides support for 0-10V and 1-10V types of drivers.

Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs, via the Shelly smart home ecosystem, including theShelly Smart Control app– or link it with a popular home automation software such asHome Assistantvia aRaspberry Pi!

Note:You may require a neutral wire to use this product.Please research the device and your home wiring (safely, see below) before purchasing.

Caution – Read Before Buying

• Before beginning the installation, please read this guide and any other documents accompanying the device carefully and completely
• Danger of electrocution.The mounting/installation of the device should be performed by a qualified person (electrician)
• Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of the law or refusal of legal and/or commercial guarantee(if any)
• Allterco Robotics (makers of Shelly products) and Mann Enterprises LTD are not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in the printed guide accompanying this product (also available in the resources section below)
• Do not connect the device to appliances exceeding the given max load.
• Use the device only with a power grid and appliances which comply with all applicable regulations. Short circuit in the power grid or any appliance connected to the device may damage the device.
• Before starting, wire check that the breakers are turned off and there is no voltage on their terminals. This can be done with a phase meter or multimeter. When you are sure that there is no voltage, you can start wiring the cables.

Features

• Supports 0-10V and 1-10V types of drivers (lights, motors, valves, etc.)
• Wi-Fi and Bluetooth-operated
• One/dual button dimming mode (use with physical switches)
• Customizable thresholds and offsets for temperature, humidity and light if used with Plus Add-on
• Power measurement: Precise monitoring of energy consumption. Information about voltage (V), current (A) and consumption (W) is displayed.
• Safety: ver current/voltage/power protections
• Supports Night mode: Automatically sets the lights’ brightness at a low level during the night hours
• Wi-Fi Range Extender & BLE Gateway
  • Can be used as a Bluetooth gateway for Shelly BLU sensors such as the Shelly BLU Motion
• Equipped with a new processor & increased flash memory – ESP Shelly
• No hub required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants. Use it with Alexa, Home Assistant, or your preferred automation platform
• Supports KNXnet / IP communication
• Shelly Plus Add-On compatible: Supports connection with the optional Shelly sensor interface to measure different data (humidity, temperature, etc. – not currently stocked)

Use Cases

• Control brightness of dimmable lights within the 0-10V range to set the perfect brightness
• Create smart schedules to have lights automatically adjust their brightness throughout the day
• Retrofit your existing lighting system with the Dimmer 0/1-10V PM Gen3 and continue using your current switches
• Sync your lights with sunrise and sunset times easily using smart schedules
• Activate a night mode for reduced brightness during nighttime hours
• Integrate with third-party systems like Home Assistant, Google Home, Alexa and SmartThings for expanded control options
• Utilise the device to dim lights up or down with a single or double button press
• Monitor and measure power usage of connected lights for energy management

Specifications

Resources

• Shelly Product Documentation
• Printed User Guide(as found within the package)
• Components and APIs
• Declaration of Conformity
• Device Identification
  • Device name: Shelly Dimmer 0/1-10V PM Gen3
  • Device model: S3DM-0010WW
  • Device SSID: Shelly0110DimG3-XXXXXXXXXXXX
  • BLE model ID: 0x1072
• EAN: 3800235261750

Handy Shelly Resources

• Shelly Cloud
• Shelly App
  • Apple App Store
  • Google Play
  • Huawei AppGallery
• Home Assistant Shelly Integration
• Shelly Community Forum
• Shelly Facebook Support Group
• Shelly Knowledgebase
• Shelly Device Finder(easy-to-use software to find Shelly devices in the local network)
• Shelly Developer API

Package Contents

• 1x Shelly Dimmer 0/1-10V PM Gen3
• 1x User Guide