The ECCL is designed to provide strong column-to-beam connections in end-of-beam applications when two beams intersect in an “L” formation on top of a column. When properly installed, this column cap helps to distribute the load from the beams and provides support for the connection. End column caps are special-ordered per specific details from the designer to accommodate the many combinations of beam and post sizes.

• Model No. ECCLL464
• Description. 4X Beam, 6X Post, 4X Beam End Column Cap
• Direction. Skewed Left
• Material. Steel
• Finish. Simpson Strong-Tie Gray paint
• See SPECS : Specifications

Key Features

• Certified welds for confidence in strength and loading
• Bolt spacing that meets NDS code requirements to ensure optimal performance
• Diamond holes to provide temporary fastening

Options

• Many combinations of beam and post sizes can be manufactured. Refer to worksheetOptions for Multiple-Beam, Bolted Column Caps.
• Contact us for Configurable Options and Special orders
• The download shall be determined from the allowable loads for the unmodified product (see ECC column caps). The side beam can take a maximum of 40% of the download and shall not exceed 10,665 lb. The sum of the loads for the side beam(s) and main beam cannot exceed the table load.
• Uplift loads do not apply for ECCL caps.
• The column width in the direction of the main beam width must be the same as the main beam width (W1).
• Specify the stirrup height from the top of the cap. The minimum side stirrup heights (H2 or H3) is 6 1/2″ (3 1/2″ for models ending in “44”).
• The L dimension may vary depending on the width of the side stirrup (W3 or W4).
• Column caps may be ordered without the column straps for field welding to a steel column. Specify “No Straps” when ordering. Weld by designer. Full loads apply for the beam and the post cap.

This is a Special Order item, or Made to Order by Simpson Strong-Tie, it is non-refundable. Please verify that all configurations / specifications are correct before checking out.

Note: Product dimensions may differ from picture. Please see above item description for specifications.