Model No. BC60R
Nominal Post Size 6x rough
Ga. 18
W1 (in.) 6
L1 (in.) 6
H1 (in.) 3
Coating/Material Zinc Galvanized, G90

Product Guide & SPECS:View Spec Sheet

The Simpson Strong-Tie BC series offers dual purpose post cap/base for light cap or base connections. The BC60R post base is designed to be used with rough cut lumber and is approved to be installed with the specified nails or Strong-Drive SD connector screws. The Strong-Tie BC60R post base features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

• Manufacturer Name: Simpson Strong-Tie
• Fasteners Required: Post Flange – (6) 0.162 x 3-1/2″ Nails. Base Bottom – (4) 0.162 x 3-1/2″ Nails

Installation:

• Use all specified fasteners.
• Do not install bolts into pilot holes
• BC: install with 16d commons or 16dx2 1/2″ joist hanger nails.
• Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
• To tie multiple 2x members together, the Designer must determine the fasteners required to join members to act as one unit without splitting the wood.

Note: Please see item description for specifications. Product dimensions and/or Nail or Screw holes may differ from picture.