For all the DIY keebfans in the house here is a super sleek and sturdy 2-Key Aluminum Keypad Shell in Black, the perfect base to begin your custom keypad project. You provide the PCB in the housing and bolt it into this base. Makes for a prettier build with more protection than just layers of PCB or acrylic. While it’s designed for a custom PCB, you could also just snap in 2 keys and ‘free wire’ them. Comes with one anodized black aluminum enclosure and a clear acrylic bottom that screws on with one bolt.

Designed for use with any “Cherry MX” keyswitches or compatibles, like Kailh or Gateron.

Note: This isthe keypad shell ONLY. Don’t forget to grab some keycaps and switches.

Specifications

• Product Dimensions: 40.0mm x 21.0mm x 11.5mm / 1.6″ x 0.8″ x 0.5″

Product Specs

• Keyholes: 14mm x 14mm
• Key spacing: 19mm
• Screw size: M2
• Screw length: 4mm

Inner dimensions for pcb:

• Length: 37mm
• Width: 17.5mm
• Height: 5mm
• Screw receptacle diameter: 3mm
• Screw receptacle height: 3mm
• Distance from screw receptacle center to end (length): 18.5mm
• Distance from screw receptacle center to end (width): 8mm

End connector dimensions:

• Outer length: 12mm
• Outer height: 5mm
• Inner width: 3.5mm